一本道无码

Divided into teams 鈥� focused on communications; guidance, navigation and control (GNC); and vision 鈥� students from 一本道无码 simulated how a satellite collects and transmits usable images.

Across the room, their peers on the avionics team laid out rows of circuit boards and explained how to push updates to the satellite when it鈥檚 in space. The buzzing in the room stops for the mechanical team as they reach a critical juncture. They need pieces of fishing line to break.

The translucent strings snap, allowing solar panels to unfold from the sides of the cube satellite and prompting Ashley Kline, a master's student in , to throw her arms up in celebration. The solar panels will allow the small satellite to power its mission: keeping track of itself in orbit.

The successful test occurred during demonstration day for 一本道无码's Spacecraft Design-Build-Fly Laboratory course, which brings together students from 一本道无码鈥檚 , Mellon College of Science(opens in new window) and for two semesters to design and build a small satellite that is planned to launch into space next year. , an assistant professor in the Robotics Institute (RI), and , a professor in the Electrical and Computer Engineering Department (ECE), led the class.

鈥淚 would have loved to have this class as a student,鈥� Manchester said.

Small satellites, known as nanosatellites, can be useful for agriculture, disaster response or scientific research. But to use these devices, researchers need to know where they are in orbit, which can be an expensive and imprecise undertaking. Kyle McCleary, an ECE Ph.D. student and teaching assistant for this class, has been researching the use of visual sensing and machine learning algorithms to improve orbit determination on these small satellites. In the course, McCleary and about 30 students put this research into practice.

Students were divided into five teams: communications, avionics, mechanical, GNC and vision. This structure reflects the subsystem teams one would see at NASA or other space exploration companies.

The communications team was responsible for radio commands sent to and from the satellite while in space. The satellite鈥檚 antenna, made from a bright yellow measuring tape, delivers images and measurements to the teams to help them determine where the satellite is located. The team also built a ground station that鈥檚 been receiving information from the cube satellites Manchester launched in early March.

Rohan Raavi, a senior in ECE, was on the avionics team. He joked that he tried not to think too much about this satellite going to space because of the pressure. But he said he loved the class.

鈥淚t shows you how much more there is to learn and how much room there is for advancement in this area of science and engineering,鈥� Raavi said. 鈥淭he space industry has been focusing a lot on reliability because they don鈥檛 want to risk failure, meaning there鈥檚 a lot of room for progress and improvement, like what we are doing in this course.鈥澛�

The avionics team designed the satellite's circuit boards and the software needed to execute commands. Their work needed to get to space, which is where the mechanical team came in. They ensured everything was built correctly to fit into the rocket and that the satellite switched on and deployed its solar panels when the device got to space.

When Manchester came to 一本道无码, he and Lucia teamed up to launch this course. He said telling the students this satellite was going to space gave the students a sense of seriousness, knowing this project would end up in Earth鈥檚 orbit contributing to new research.

The students in this class started from a mission concept, Lucia explained.

鈥淭hese students are so impressive. These are mission requirements that professional engineers fail to accomplish, but they鈥檝e created something that鈥檚 ready to fly,鈥� he said.聽

The GNC and vision teams collaborated closely on the mission's main objective 鈥� determining where the satellite is in orbit. Six cameras mounted to the satellite capture images of Earth and identify landmarks. The GNC team ensures that the vision team can make accurate measurements by slowing and controlling the satellite's rotation. Electricity flows through coiled wires in the satellite, turning it into a magnet that interacts with Earth鈥檚 magnetic field. Using clever algorithms, GNC can adjust the amount of current in these coils to control the satellite's rotation.

Once the satellite is correctly oriented to take images, the vision team uses cameras and machine learning to handle the final step: determining the satellite's location. Images of Earth pass through a region of interest (ROI) classifier, which identifies predefined locations of interest in these images 鈥� something easily identifiable like an inland lake. The team then uses this data to determine the satellite's position and velocity.

Haochen Zhang, a master's student in RI, was on the vision team. She explained this was the first course she鈥檚 taken where the whole class worked on one project from beginning to end.

鈥淚 got to work on something that I鈥檓 interested in, vision, and I got to experience and learn about other people鈥檚 specialties while watching this mission come together,鈥� Zhang said.

When the demo day ended, everyone gathered for a team photo, filling in around a table that held their satellite. Lucia and Manchester said they intend to keep this class going. The mission concept for the next offering will use processors developed by 一本道无码 spinout Efficient Computer, a company Lucia co-founded to develop chips that will provide the satellites with the capability to do onboard computing on sensor data with unprecedented efficiency.